4
Setup and Connections
Unpack the Box
Carefully unpack the items in the box:
• DVD player
• Remote control and batteries
• Audio/Video cables
• S-Video cable
• Power cord
Install Batteries in the Remote
1. Open the battery door on the back of the remote.
2. Insert fresh batteries. Make sure that the polarities
(+ and –) are aligned correctly.
3. Replace the battery door.
Important Battery Information
• If you’re not going to use the remote for a month or more, be
sure to remove the batteries because they can leak and cause
damage.
• Dispose of batteries in the proper manner, according to federal,
state, and local regulations.
• Any battery may leak electrolyte if mixed with a different battery
type, if inserted incorrectly, if all batteries are not replaced at the
same time, if disposed of in fire, or if an attempt is made to
charge a battery not inteed to be recharged.
• Discard leaky batteries immediately. Leaking batteries can cause
skin burns or other personal injury.
