104
Keep Settings
The keep settings mode is for preserving settings after the power is turned off. Each
setting is saved and becomes effective when the camera is powered. The following
settings can be saved.
• Flash (p.54) • Exposure Compensation (p.57)
• Recording mode (p.44) • White Balance (p.59)
• Date Imprint (p.65) • Language (p.106)
• CARD/IN (p.42) • S Mode (p.71 )
• FOCUS (p.63) • AUTO BRACKET (p.72)
• SOFT Mode (p.70)
q Set the mode dial to [ ].
The setup menu is displayed.
Note
• To cancel the operation, set the mode
dial to another mode.
w Press the or button to select [KEEP
SETTINGS] and press the ENTER button.
The setup menu will be displayed.
Note
• To cancel the operation and return to
the setup menu, press the MENU
button.
e Press the or button to select a
mode for setting the keep settings.
r Press the ENTER button to change the
setting to [ON].
With [REC Mode], press the ENTER button to
select a mode to keep.
Keep Setting will be programmed. To program
more items, repeat steps e and r as many
times as needed.
The settings of the items for which Keep Setting
is programmed will be retained even when the
camera is turned off.
MENU
[
SET UP
]
FORMAT
DATE SETTING :1999/1/1
KEEP SETTINGS
BEEP SOUND :ON
AUTO POWER OFF :1 MIN
LANGUAGE :ENGLISH
VIDEO OUT MODE :NTSC
VERSION
SEL.:ENTER
MENU
[
KEEP SETTINGS
]
FLASH :OFF
+
/– :OFF
WHITE BALANCE
:OFF
RECORDING MODE :OFF
DATE IMPRINT :ON
LANGUAGE :ON
CARD/IN :OFF
S MODE :OFF
BACK:MENU SEL.:ENTER
MENU
[
KEEP SETTINGS
]
FLASH :OFF
+
/– :OFF
WHITE BALANCE
:ON
RECORDING MODE :OFF
DATE IMPRINT :ON
LANGUAGE :ON
CARD/IN :OFF
S MODE :OFF
BACK:MENU SEL.:ENTER
