Radiant with Wall Brackets Infrared with Wall Brackets
Radiant Mounted on
Special High Shelf
Infrared Mounted on
Special High Shelf
Fig. 1
Assembly over a Heavy Duty Gas Range (Fig. 1)
If the broiler is to be mounted over a gas range, a reinforced high shelf and special
mounting brackets are required. These are furnished when ordered as an elevated broiler.
1. Remove existing rear shelf and install reinforced high shelf.
2. Using the four bolts provided, install mounting brackets on both top corners of
reinforced shelf.
3. Place and align broiler on top of brackets with the back of the unit flush with the rear
of the shelf.
4. Using a #19-drill bit, drill from below through the four holes provided on the
mounting bracket into the base of the unit.
5. Drive four #10-24 self-tapping screws (provided) into the drilled holes.
6. Attach both broiler and high shelf to common rear panel with self-tapping screws.
OPERATION
WARNING: THE BROILER AND ITS PARTS ARE HOT. BE CAREFUL WHEN OPERATING,
CLEANING OR SERVICING THE BROILER.
CONTROLS
Trigger Handle — elevates or lowers the broiling grid to different positions. Grasp the
handle and pull straight out from the broiler. This releases the
mechanism and allows the lifting handle to move into the desired
position.
-
6 -
