– When set to the ON position the
D2500 is powered up and ready for operation.
– The D2500 receives standard, or
system exclusive, MIDI data here.
- The D2500 transmits stan-
dard, or system exclusive, MIDI data here.
D MIDI THRU DIN connector
- The D2500 passes standard,
or system exclusive, MIDI data here.
E I/O Accessory Blank Panel
– removable blanking panel
accesses option bay for adding additional Analog-to
Digital or Digital Input/Output boards.
- Connect the supplied heavy
gauge 3-pin “IEC” power cable here.
D-NET Accessory Blank Panel
panel accesses option bay for adding the D-NET interface
card for control multiple D class units.
CH1 Balanced XLR jack input
CH2 Balanced XLR jack input
CH1 Balanced XLR jack output
balanced XLR jack output.
CH2 Balanced XLR jack output
K CH2 Balanced XLR jack outputK
balanced XLR jack output.
– This switch is used to page
through the LIMITER parameters. When selected,
the amber LED will illuminate and the LIMITER
parameters will be displayed in the LCD window.
to engage the EQ, FEEDBACK, GATE, DELAY,
ENHANCER and LIMITER effects. When one of
the above effects switch is selected, (for example
FEEDBACK), that effect is turned on when the IN /
OUT amber LED is illuminated.
– When engaged, the red LED will
illuminate indicating access to the unit's GLOBAL
- This switch is used to page through
the MIDI parameters. When selected, the red LED
will illuminate and the MIDI parameters will be dis-
played in the LCD window.
– Used to load one of the 100 pro-
grams from the internal memory.
- Used to store one of the 100 pro-
grams into the internal memory.
- Twelve segment LED meter display
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES
CLASS B. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MUST NOT CAUSE HARMFUL
INTERFERENCE
, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT
MAY C
AUSE UNDESIRED OPERATION.
