![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/a/01/a01a50ee-f614-4e99-85f2-cf6e0f79be3b/a01a50ee-f614-4e99-85f2-cf6e0f79be3b-bg10.png)
Storing the Stations Manually
You can store up to 100 television stations, including those received
via the cable network. If you have a dual tuner model, the stations
are stored for both tuners at the same time (television and VCR).
When storing stations manually, you can choose:
◆ Whether or not to store each of the stations found
◆ The programme number by which you wish to identify
each stored station
◆ To enter the frequency of the station to be stored
directly, if you know it
You have about 30 seconds to make each selection described
below. If you do not make a selection within this period of time,
the menu disappears.
➢
If you wish to receive a scrambled television station,
check that the decoder is switched off
. Switch it back on
once you have finished storing the stations.
1 Press MENU ( ).
Result: The television menu is displayed.
2 Select the TUNE option by pressing P ▼, followed by the + button.
Result: The tuning menu is displayed with the MANUAL TUNE is
selected.
➢ The TUNE option is not available if:
◆ The AV input is selected; press INPUT ( ) to select an
ordinary station
◆ A video cassette is playing; stop the cassette
3 Press the + button.
Result: The list of options is displayed.
4 If you... Then...
Know the frequency of ◆ Select the FREQUENCY option by
the station to be stored pressing P ▼ the required number of
times.
◆ Enter the required frequency by
pressing the numeric buttons or the +
and - buttons.
Result: The station is displayed.
◆ Go to Step 5 on the following page.
Do not know the frequency ◆ Select the SEARCH option by pressing
of the station to be stored P ▼ the required number of times.
◆ Press:
-
to search backwards through the
frequencies
+
to search forwards through the
frequencies
Result: When a station is found,
the searching stops and
the channel is displayed
on the screen. You can then:
- Continue the search by
pressing + or - again
- Store the station; go to step
5 on the following page
16
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST SELECT EXIT
CURRENT PR. : P O
NEW PR. : P 0
NAME : - - - - -
SEARCH :
FREQUENCY : 192.00MHz
AFT : ON
:STORE X:CLEAR EXIT
ADJUST SELECT
GB
CURRENT PR. : P O
NEW PR. : P 0
NAME : - - - - -
SEARCH :
FREQUENCY : 192.00MHz
AFT : ON
:STORE X:CLEAR EXIT
ADJUST SELECT
TUNE
MANUAL TUNE
AUTO TUNE
ADJUST SELECT EXIT
V.MENU MUTE
DISPLAY P.STD
MENU
P
P
02255A_eng2_mono 6/29/04 10:45 AM Page 16