26 27
GB GB
Selecting the Colour Mode
NICAM (Newzealand Model only)
Before recording or playing back a cassette, you can select the
required system standard.
➢
◆ When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 After pressing the MENU, press the OK or
❿ .
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select the
User Set option.
3 Press the OK or
❿
to select this option.
Result
: The User Set menu is displayed.
4 Press the corresponding
or
❷
buttons, until the Colour
System option is selected.
5 Press the OK or
❿
button to select Auto
➝
PAL
➝
MESECAM
➝
B/W.
B/W Black and White
6 On completion, press RETURN three time to exit the menu.
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 40.
1 After pressing the MENU, press the OK or
❿ .
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select the
User Set option.
3 Press the OK or
❿
to select this option.
Result
:The User Set menu is displayed.
4 Press the corresponding
or
❷
buttons, until the NICAM option
s selected.
5 To... Press OK or
❿
, until...
Mono mode Off is displayed.
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode Onis displayed.
On: Normally set at this position.
6 On completion, press RETURN three times to exit the menu.
