179
Connecting & Transferring > Connecting to a computer
4
Turn on the camera.
•
The computer recognizes the camera automatically.
5
On your computer, select My Computer
ĺ
Removable Disk
ĺ
DCIM
ĺ
100PHOTO or 101_0101.
6
Select the les you want, and then drag or save them to your
computer.
If the Folder Type is set to Date, the folder name appears as “XXX_MMDD“.
For example, if you capture a photo on January 1, the folder name will be
“101_0101“.
Disconnecting the camera (for Windows 7)
When the camera is connected to the computer as a removable disk,
follow the instructions below to disconnect the camera. With Windows
Vista and Windows 8, the methods for disconnecting the camera are
similar.
1
Ensure that no data is being transferred between the camera
and the computer.
•
If the status lamp on your camera is blinking, it means the data
transfer is in progress. Please wait until the status lamp stops
blinking.
2
Click on the tool bar at the bottom right of your computer
screen.
3
Click the pop-up message.
4
Click the message box indicating safely removed.
5
Remove the USB cable.
