25
HOW TO ASSEMBLE
Fit the ➂part, while pressing it,
into ➃part.
Fit the locking part of ➁part into
the hole of ➃part.
Insert ➄part and ⑥part into
➃part.
Insert ®Á part while pressing the
lower end of ® A part.
Insert the long portion of ⑥part into
the hole of ➁part.
• At this time, the popping portion of ⑥part has to
be fitted into the grooves of ➁part.
➂part
➃part
➁part
➃part
➄part
➃part
⑥part
Hole
➁part
Popping porting
⑥part
• Be careful not to recklessly pull out spring
or not to make the spring stretched.
• Water leakage may be caused by filling
water tank with water or by pressing water
supply lever if rubber packing or rubber
ring were missing while assembling.
Assemble all parts in steps without missing
any one of them.
DA68-60306A REV(0.1) 4/21/05 6:37 PM Page 26
