27
Turning unit On/Off and using the HOLD Function
ENG
Updating Firmware
26
7 Select [Update OS Image] after
pressing the [File] button.
6 When a file search window appears,
select the “EBOOT_FACTORY.bin”
file in the
[Latest Firmware Utility & Upgrade Utility]
folder and then press the [Open] button.
A window will open saying “Download
Success”, and then press the [OK] button
8 When a file search window appears,
select the "NK.bin" file in the
[Latest Firmware Utility & Upgrade Utility]
folder, and then press the [Open] button.
A window will open saying “Download
Success”, and then press the [OK] button
● Firmware update is completed.
● When you close the firmware update window, the player will be automatically restarted.
I Turning On/Off
I HOLD Function
Make sure to check whether the unit is fully charged before turning it on.
1 Push the SYSTEM ON/OFF switch to ON position at the rear of the main unit.
Press the Power button on the main unit.
2 To turn off the unit, press the Power button on the main unit again.
If you don’t use the main unit for long period of time, push the SYSTEM
ON/OFF switch to OFF position.
OFF
↔
ON
Use the Volume Control on the side of the main unit to adjust the volume.
● Volume can be adjusted from 0 to 20.
¤¤
Adjusting Volume
Hold Function of the Main Unit
Activate on the main unit.
❈All buttons on the main unit will be disabled,
and only the buttons on the remote control can
be used for input.
❈When you activate the HOLD switch, a " "
appears on the display.
Hold Function of the Remote Control
Activate on the remote control.
❈All buttons on the remote control will be
disabled, and only the buttons on the
main unit can be used for input.
❈When you activate the HOLD switch,
a " " appears on the display.
