Adding a New Contact to Your Personal List
You can store the total of 200 entries in the Personal List/
Personal Groups.
1. Press (right softkey) or press to access the 10-4 List.
2. Press (left softkey), highlight Personal List, and press .
3. Highlight <Add Contact> and press .
– or –
Highlight an entry and press (right softkey). Then
highlight Add Contact and press .
ᮣ
If the Personal List is full, you will see a warning message on
the display.
4. Enter a name for the new contact and press . (This is the
name you will see when calling or receiving a call from the
contact.)
5. Highlight the 10-4 Number field, enter the contact’s 10-digit
10-4 number (their Phone number) and press .
6. Press (left softkey) to save the new contact to your
Personal List.
Tip: You are not allowed to use the following symbols during step 4:
: , @ , ; , / , * , ) , and (.
Save
Options
Go to
10-4
101
Saving a 10-4 Number
You can save a 10-4 number from the ending display to your
Personal List/Personal Groups.
1. From the ending display, press (right softkey).
2. Enter a name and press .
3. Press (left softkey).
4. Press (left softkey).
Tip: If the entry already has a name, skip step 2 and 3 above.
Note: If the number is already stored in the Personal List/Personal Groups,
the “Save” softkey does not appear.
Finding an Entry in the 10-4 List
You can find your desired entry by entering a few letters.
1. Press (right softkey) or press to access the 10-4 List.
2. Press (left softkey), highlight your desired list
(Company List, Company Groups, Personal List, or
Personal Groups), and press .
3. Enter the first letter or the first few letters of the name.
ᮣ
The display shows the list beginning with the letter(s) you
entered.
4. Scroll through the list and press to select your desired
entry.
Go to
10-4
Yes
Save
Save
100
