Network Scanner
8
1
9. Status indicators
Show the status of the selected function.
• When lit yellow, the corresponding
function is selected.
• When lit green, the corresponding
function is active.
• When lit red, the corresponding func-
tion is interrupted. Press the respec-
tive key, and then follow the
instructions that appear on the screen.
10. Function keys
Press the {
{{
{Copy}
}}
}, {
{{
{Document Server}
}}
}, {
{{
{Fac-
simile}
}}
}, {
{{
{Printer}
}}
}, or {
{{
{Scanner}
}}
} key to acti-
vate the respective function. The display
content changes accordingly.
The indicator for the selected function
lights up.
11. Number keys
Use to enter numeric values.
12. {
{{
{#}
}}
} key (Enter key)
Use to enter a numeric value.
13.
{
{{
{Clear/Stop}
}}
} key
• Clear: Clears an entered numeric val-
ue
• Stop: Stops scanning
14.
{
{{
{Start}
}}
} key
Use to begin scanning, file storing, or de-
livery.
Display Contents
The normal screen configuration is as follows.
The display's contents differ depending on the function.
Note
❒ The Copy screen is set as the default screen when the machine is turned on.
You can change this setting in the System Settings. See General Settings Guide.
Using as a network TWAIN scanner
When using the machine as a network TWAIN scanner, it is not necessary to
press the {
{{
{Scanner}
}}
} key on the control panel. When the TWAIN driver becomes
active on a client computer, the display automatically switches to the following
screen.
Press [Cancel] to use functions other than the network TWAIN scanner function.
