SERVICE AND ADJUSTMENTS
Jill/u/l,== " ; _ •i _ • , • ....................... •.................. , ............................................................................
TO REPLACE HEADLIGHT BULB
• Raise hood,
• Pull bulb holder out of the hole in the backside of the
grill.
• Replace bulb in holder and push bulb holder securely
back into the hole in the backside of the grill
, Close hood_
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running, or prevent it from starting,
• Check wiring° See electrical wiring diagram in the
Repair Parts section of this manual.
TO REPLACE F:USE
Replace with 30 amp automotive-type plug-in fuse, The
fuse holder is located behind the dash.
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig. 29)
• Raise hood_
• Unsnap headlight wire connector.
• Stand infront of tractor,, Grasp hood atsides, tilttoward
engine and lift off of tractor°
• To replace, reverse above procedures,
HOOD
HEADLIGHT
WIRE
CONNECTOR
FIG. 29
24
