Putting the EZX 80 into operation
12 | EZX 80
Pairing the EZX 80 with a Bluetooth device
The following chapter describes, by way of example of a mobile phone,
how to pair the EZX 80 with a Bluetooth device. In case of deviation,
proceed as described in the instruction manual of your mobile phone.
1 Switch the headset on (see page 14). Then keep the multi-function
button pressed until the LED alternately flashes blue and red. The
headset is in pairing mode.
2 Enable the Bluetooth visibility on your mobile phone.
3 On the mobile phone, start a search for Bluetooth devices. All available
devices in the proximity of the mobile phone are displayed.
4 From the found Bluetooth devices, select “Sennheiser EZX 80” to
establish a Bluetooth connection to the headset. If necessary, enter the
default PIN code “0000”.
5 Once the headset is paired with the mobile phone, the LED turns off.
1 2
3
5
4
20 cm
ON
Menu
Bluetooth on
Bluetooth o
Menu
Add device
Sennheiser EZX 80
Mobile phone Jane
Sennheiser EZX 80
Keyword:
0000
