Putting the MM 450 into operation
12
Disconnecting the Bluetooth connection
To disconnect the Bluetooth connection to the audio source, you can
switch off the headset or the Bluetooth function.
To switch the headset off:
̈ Press the Master button ቦ and keep it pressed until the Star LED ቢ
flashes 3 times red.
You hear a descending beep. The Bluetooth connection is automatically
deactivated. The headset switches off.
To switch the Bluetooth function off:
̈ Press the Bluetooth button ´ and keep it pressed until the Star LED ቢ
flashes 3 times red. You hear a descending beep.
The Bluetooth button ´ goes off. The Star LED ቢ flashes blue and the
Bluetooth function is switched off.
The Bluetooth button ´ is backlit, indicating the current
setting. The backlighting goes off after a short time to
conserve battery power.
̈ Press any button on the headset to display the current
setting of the Bluetooth function.
5
1
ᕥ
