Using the RS 125 system
12
Using the RS 125 system
To switch the devices on and to listen to your sound source,
proceed as follows:
Switching the transmitter on and off
Switching the transmitter on
̈ Switch your sound source on.
The transmitter automatically switches on and the opera-
tion indicator 7 lights up.
If the transmitter does not switch on:
̈ Increase the volume of your sound source and, if necessary,
read the chapter “The transmitter does not switch on” on
page 18.
Switching the transmitter off
̈ Switch your sound source off.
If there is no signal from the sound source for more than three
minutes, the transmitter automatically switches off and the
Sequence of steps Page
1. Make sure that the rechargeable batteries are
charged.
10
2. Switch your sound source (e.g. TV) on. 12
3. Switch your headphones on. 13
4. Set the desired volume. 15
5. If necessary, set a different channel for your
sound source.
14
