Password setting for parental
control
Allows you to use a password to protect certain
settings from being accidentally changed.
IMPORTANT:
Two conditions must be met to enable the V-Chip
1
Password is registered.
2
V-CHIP settings have been made.
3
“V-CHIP” is set to “ON”.
Setting a password
Press
/
to select (LOCKS).
Press
/
. The password entering menu
displays.
Press MENU and the MENU screen
displays.
Select and enter a password (4 digits) using
the number buttons (0–9), then press
ENTER.
Enter the same password again to confi rm,
then press ENTER, the password is now
registered and the V-CHIP SET menu will
appear on the screen.
Useful adjustment settings
1
2
5
3
Press / to select “NEW PASSWORD”,
then press /.
Repeat steps 1 to 3 in setting a password.
• The password entering menu displays.
Changing the password
Allows you to change your current password.
Input the 4-digit password by using 0–9.
1
2
3
Enter a new password using 0–9, then
press ENTER.
Enter the same password again to confi rm,
then press ENTER.
