1-3
BEFORE USING THE MACHINE
Contents
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1)-a Document cover*
Place an original on the document glass and close the
document cover before copying starts.
(1)-b Automatic document feeder*
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞ PLACING THE ORIGINAL (page 1-35)
(2) Front cover
Open this cover to switch the main power switch to "On"
or "Off" or to replace a toner cartridge.
☞ TURNING THE POWER ON AND OFF (page 1-15)
☞ REPLACING THE TONER CARTRIDGES (page
1-61)
(3) Output tray (centre tray)
Output is delivered to this tray.
(4) Operation panel
This is used to select functions and enter the number of
copies.
☞ OPERATION PANEL (page 1-8)
(5) Exit tray unit (right tray)
*
When installed, output can be delivered to this tray.
(6) Finisher*
This can be used to staple output. A punch module can
also be installed to punch holes in output.
☞ FINISHER (page 1-41)
* Peripheral device.
BEFORE USING THE MACHINE
(1)-b
(2)
(3)
(6)
(5)
(4)
(1)-a
When a finisher is installed
