Sharp MX-M564N Manual

Open as PDF

next previous

SUPPLIES

Standard supplies for this product that can replaced by the user include paper, toner cartridges, and

staplecartridgesforthenisher.

BesuretouseonlySHARP-speciedproductsforthetonercartridges,nisherstaplecartridge,and

transparencylm.

The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of

production. Spare parts are those parts of the machine which may break down within the scope of the ordinary

use of the product, whereas those parts which normally exceed the life of the product are not to be considered

as spare parts. Consumables too, are available for 7 years following the termination of production.

� Proper storage

1. Store the supplies in a location that is:

• clean and dry,

• at a stable temperature,

• not exposed to direct sunlight.

2. Storepaperinthewrapperandlyingat.

3. Paper stored in packages standing up or out of the wrapper may curl or become damp, resulting

in paper misfeeds.

� Storing toner cartridges

Store a new toner cartridge box horizontally with the top side up. Do not store a toner cartridge

standing on end. If stored standing on end, the toner may not distribute well even after shaking the

cartridgevigorously,andwillremaininsidethecartridgewithoutowingout.

• Store the toner in a location that is cooler than 40°C (104°F). Storage in a hot location may cause

the toner in the cartridge to solidify.

• Please use SHARP-recommended toner cartridges. If toner cartridges other than

SHARP-recommended toner cartridges are used, the machine may not attain full quality and

performance and there is a risk of damage to the machine.

GENUINE SUPPLIES

For best copying results, be sure to use only Sharp Genuine Supplies which

are designed, engineered, and tested to maximize the life and performance

of Sharp products. Look for the Genuine Supplies label on the toner

package.

Storage of supplies

Supply of spare parts and consumables

Noise emission

Noise emission values

The following shows noise emission values as measured according to ISO7779.

Sound power level L

MX-M364N MX-M464N MX-M564N

Operating (continuous printing) 7.4 B 7.5 B 7.6 B

Standby mode (Low power level mode) - - -

Sound pressure level LpAm

MX-M364N MX-M464N MX-M564N

Operating

(continuous printing)

Bystander positions 57 dB 58 dB 59 dB

Standby mode Bystander positions - - -

•Operating: With options MX-DE14, MX-RB22, MX-FN11.

•Standby: “-”=less than background noise.

� Caution

Useofcontrolsoradjustmentsorperformanceofproceduresotherthanthosespeciedhereinmay

result in hazardous radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007)

SAFETY DATA SHEET

The SDS (Safety Data Sheet) can be viewed at the following URL address:

http://www.sharp-world.com/corporate/eco/env-info/sds/index.html

� Staple cartridge

Thenisherandsaddlenisherrequirethefollowingstaplecartridge:

MX-SCX1(fornisherandsaddlenisher)

Approx. 5000 per cartridge x 3 cartridges

AR-SC2(fornisher(largestacker)andsaddlestitchnisher(largestacker))

Approx. 5000 per cartridge x 3 cartridges

AR-SC3(forsaddlestitchofsaddlestitchnisherandsaddlestitchnisher(largestacker))

Approx. 2000 per cartridge x 3 cartridges