GB-19
ENGLISH
BEFORE OPERATION
MICROWAVE POWER LEVELS
Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set the clock, see below.
SETTING THE CLOCK
There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 24 hour clock, press the CLOCK/DELAY START button once and “24H” will appear in the display. To
set the 12 hour clock, press the CLOCK/DELAY START button once more and “12H” will appear in the display.
2. Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23 (24-hour
clock) or 1 -12 (12-hour clock).
3. Press the CLOCK/DELAY START button, the minute gure will ash.
4. Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be
within 0-59.
5. Press the CLOCK/DELAY START button once to start the clock. The icon “:” of the digital time will be ashing
on the display.
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will show "0:00".
• To check the time of day during a cooking process, press CLOCK/DELAY START button and the LED will
display the time of day for 2-3 seconds. This does not a ect the cooking process.
•
In the process of clock setting, if the STOP/CLEAR button is pressed, the oven will go back to the former setting.
•
If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after the
power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.
Power Level Press the MICRO.
POWER button
Display
(Percentage)
Display
(Indicators
that light up)
• Your oven has 5 power levels, as shown.
• To change the power level for cooking, press
the MICRO. POWER button or rotate the
ENTRY dial key until the display indicates the
desired level. Press the START/+30sec./ENTER
button to con rm, enter the cooking time and
then press the START/+30sec./ENTER button
to start the oven.
• To check the power level during cooking, press
the MICRO. POWER button, the current power
level will be displayed for 2-3 seconds. The oven
continues to count down although the display
will show the power level.
HIGH x1 P100
(100%)
MEDIUM
HIGH
x2 P80
(80%)
MEDIUM x3 P50
(50%)
MEDIUM LOW
(DEFROST)
x4 P30
(30%)
LOW x5 P10
(10%)
Generally the following recommendations apply:
P100 - (HIGH output = 900W) used for fast cooking or
reheating e.g. for casseroles, hot beverages, vegetables
etc.
P80 - (MEDIUM HIGH output = 720W) used for longer
cooking of dense foods such as roast joints, meat loaf
and plated meals, also for sensitive dishes such as
sponge cakes. At this reduced setting, the food will
cook evenly without over cooking at the sides.
P50 - (MEDIUM output = 450W) for dense foods
which require a long cooking time when cooked
conventionally, e.g. beef casserole, it is advisable to use
this power setting to ensure the meat will be tender.
P30 - (MEDIUM LOW output = 270W Defrost setting)
to defrost, select this power setting, to ensure that
the dish defrosts evenly. This setting is also ideal for
simmering rice, pasta, dumplings and cooking egg
custard.
P10 - (LOW output = 90W) for gentle defrosting, e.g.
cream gateaux or pastry.
