Slant/Fin B-200A Manual

next previous

Bobcat Model B-120A and B-200A

Mode

Display

Description & Temperature Display

Boiler is on stand-by mode.

Temperature display shows supply water Temp.

Space heating mode.

Temperature display shows supply water Temp.

Domestic hot water mode.

Temperature display shows supply waterTemp.

Frost protection mode.**

Temperature display shows supply water Temp.

Lockout (Alarm) condition.

Temperature Display indicates the lockout code

Reset button must be pressed to resume normal operation.

Error Condition. *

Temperature display indicates the error code.

Warning Condition. ***

Temperature display indicates the error code.

Bobcat Boiler Display Board

“Boiler Operation Status”

Note:

Blinking dot on “Mode Display” indicates active heating control, burner off. Steady dot

indicates burner is on.

*: Error must be corrected to resume boiler operation. Pressing the “Reset” button is not

required.

**: The boiler circulator is energized, when boiler water temperature drops below 50˚F.

***: Error must be corrected to resume DHW operation. Space heating not affected.

Pressing the “Reset” button is not required.

Table 1

Table 3

Table 1

Table 3

Table 1

Table 3

Table 1

Table 3

Table 1

Table 3

Table 1

Table 3

Table 2

Table 1

Table 3