8
GB
Checking the accessories
Remote (1)
Size AAA batteries (R3 type) (2)
Table-Top Stand (1)
*1
Fixing screws for Table-Top Stand
(M5 x 16) (3)
Assembling screws for Table-Top
Stand (M6 x 14) (3)
Hexagon wrench (1)
Operating Instructions (this manual)
and other documents
*1
Refer to the supplied Table-Top Stand leaflet to
assemble the Table-Top Stand.
Inserting batteries into the
remote
1 Remove the protection sheet.
2 Push and slide the cover upward.
1: Attaching the Table-Top
Stand
1 Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
2 Place the TV set on the Table-Top
Stand.
~
• Align the TV from the top, slide it in until the
guide pins cannot be seen.
3 Fix the TV to the Table-Top Stand
according to the arrow marks that
guide the screw holes using the
supplied screws.
~
• If using an electric screwdriver, set the torque at
approximately 1.5 N·m {15 kgf·cm}.
Getting Started
Guide
pins
