■■ Input Versatility
Multi-format Signal Support – Up to 3G-SDI Input
The LMD-1751W accepts almost any SD or HD video format,
both analog and digital: NTSC and PAL, component 480/60i
and 575/50i, progressive 480/60P and 576/50P, and high-
defi nition 1080/60i, 1080/50i, 720/60P, 1080/24P, 1080/25P,
1080/30P, 1080/24PsF, and 1080/25PsF. It also accepts
1080/50P and 1080/60P formats from a 3G-SDI input.
In addition to the standard interfaces that cover composite,
Y/C, RGB, and component, there are two optional input slots.
Input connector confi guration can be easily modifi ed by
installing optional input adaptors into these slots.
Analog and digital computer signals via the standard HD-15
and DVI-D*
1
interfaces are also supported.
*1 Both 1080/50P and 1080/60P
signals are accepted. The images
are down-converted for display on
the LMD-1751W.
■■ External Remote Control Function
The LMD-1751W has an external remote control capability for
input/output signal selection and adjustment of various items
via Ethernet (10BASE-T/100BASE-TX) connection. Up to 32
monitors and up to four control units can be connected via
Ethernet (10BASE-T/100BASE-TX) connection and controlled
remotely on the network. The user can control individual
monitors or monitor groups simply by entering the monitor ID
or group ID number. They can also execute the same
operation on all connected monitors, or put all connected
monitors into the same setup and adjustment state.
■■ Power-saving Mode
In Power-saving mode, when no input signal is received for
over a minute, the monitor goes into Standby mode and
consumes minimal power. This function prevents unnecessary
electrical consumption.
■■ Convenient Installation
Mounting Flexibility
Mountable in a 19-inch EIA Standard Rack
The LMD-1751W (7U high) can be rack mounted using an
optional MB-530 Mounting Bracket. Complying with VESA
standards, LMD-1751W monitors can be easily mounted on
walls and ceilings.
■■ Other Features
• Wave Form Monitor and Audio Level Meter*
1
windows
• Picture-by-Picture mode
• H/V Delay function
• ACC Off
• DC operation (12V)
• Setup Level for Analog Component and NTSC signals
• Sub Control on Contrast, Chroma, Phase, and Brightness
• Blue-only mode
• Monochrome mode
• Auto Chroma/Phase setup
• DVI-D input
• DDC-2B
• Color temperature
• Scan mode selection
• Smart APA
• Stereo audio monitoring
• Protected controls
• Closed-caption decoder with an optional BKM-244CC
• Advanced marker setting
*
1
Only embedded audio is supported.
The LMD-1751W
with an optional stand, SU-561.
The LMD-1751W with an optional
MB-530 Mounting Bracket
