A SERVICE OF

logo

Selecting the Default Settings
17
1
Turn on the unit with the a/? (power) switch on the
rear panel.
The SELECT SETTING screen appears.
2
Press the + or – button to select the area where you
intend to use the unit and press the ENTER button.
If you select either 1, 3 or 5
The confirmation screen is displayed. Confirm the
selected area. When the setting is wrong, press the
RETURN button to return to the previous screen.
If you select either 2 or 4
One of the following screens appears. Press the
+
or – button to narrow the area further and then press
the ENTER button.
The confirmation screen is displayed. Confirm the
selected area. When the setting is wrong, press the
RETURN button to return to the previous screen.
2 If LATIN AMERICA is selected:
4 If ASIA EXCEPT JAPAN is selected:
Customers who will use this unit in the shaded
areas shown in the map below should select NTSC
AREA.
Other customers should select PAL AREA.
3
Press the ENTER button.
The SELECT SETTING screen disappears and the
menu item settings suitable for the selected area are
applied.
Note
When you have selected the wrong area, set the
following items using the menu. See “The default
setting values for each area” (page 16) on the setting
value.
COLOR TEMP (on page 22)
COMPONENT LEVEL (on page 25)
NTSC SETUP (on page 25)
COLOR SPACE (on page 22)
+
+
+
+
+
+
+
1
2~3
S E L E C T S E T T I N G
N O R T H _ A M E R I C A
L A T I N A M E R I C A
A F R I C A A U S T R A L A S I A
E U R O P E M I D D L E - E A S T
A S I A E X C E P T J A P A N
J A P A N
1North America
2Latin America
3Africa Australia/New
Zealand, Europe,
Middle East, Russia
4Asia Except Japan
5Japan
S E L E C T T H I S A R E A ?
[ E N T E R ] Y E S
[ R E T U R N ] NO
N O R T H A M E R I C A
L A T I N A M E R I C A
P A L & P A L - N _ A R E A
A R G E N T I N A
P A R A G U A Y
U R U G U A Y
N T S C & P A L - M A R E A
O T H E R A R E A
PAL&PAL-N area
Argentina
Paraguay
Uruguay
NTSC&PAL-M area
Other area
A S I A E X C E P T J A P A N
N T S C _ A R E A
P A L A R E A
NTSC area
PAL area