Menu
30
POWER SAVE To set and release power save mode. Power Save
OFF: No power save operation
3 MINUTES: For entering the power save mode in three
minutes
10 MINUTES: For entering the power save mode in 10 minutes
VIDEO OUT To select the format of the signal output
from the VIDEO OUT jack.
Video Out
PAL: Supplies a PAL signal (The MONITOR (PAL) switch is
enabled.)
NTSC: Supplies an NTSC signal
SOUND To turn on and off the sound with
operations.
Sound
OFF: No sound is heard.
SHUTTER: Sounds when the release or PRINT button is
pressed.
ON: Sounds for all operations (excluding pressing the zoom
lever, PLAY/CAMERA switch, and MONITOR (PAL)
switch).
CLOCK To set the date and time. Clock
Y/M/D, Date, Time
OK/RETURN
BATTERY REFRESH To refresh the NH batteries. Battery Refresh
START: Refreshing of the batteries begins.
CANCEL: Refreshing of the batteries is canceled.
MEMORY FORMAT Formats the built-in memory for image
data.
Note
When you format the memory, all image
data, including the protected ones, are
deleted.
Memory Format (CAUTION! ALL IMAGES WILL BE
DELETED.)
START: Formatting of the memory begins.
CANCEL: Formatting of the memory is canceled.
(Refer to the Operating Instructions (Advanced Operations).)
USB Selects the USB class. USB Class
STORAGE: For accessing the built-in memory for image data
as removable media in storage class
Note
Storage class is enabled only when the operation system of
the connected computer supports it.
ORIGINAL: For controlling the camera using the supplied
driver and utility software
Bluetooth Sets for the Bluetooth functions. PROPERTY: Shows the camera’s address and passkey, and the
list of the registered printers.
CHANGE PASSKEY: For changing the passkey, from 0000 to
9999.
ADD PRINTER: For registering optional printers up to three
REMOVE PRINTER: For removing a registered printer one by
one
MODULE: For turning ON or OFF the power of the Bluetooth
circuit.
(Refer to the Operating Instructions (Advanced Operations).)
Menu item Function Setting
