14 ► ID07 User Manual
Drive Size ...................................................................................................... 1/2 inch Square Drive or 7/16 inch Hex
Weight ..................................................................................................................................................7.7 lbs / 3.5 kg
Overall Length ....................................................................................................................................9 inch / 22.9 cm
Width ...............................................................................................................................................4.5 inch / 11.4 cm
Height ............................................................................................................................................10.5 inch / 26.7 cm
Motor ...............................................................................................................................................................Integral
Pressure Range.............................................................................................................................. 2000 psi / 140 bar
Flow Range ............................................................................................................................. 4–10 gpm / 15–38 lpm
Optimum Flow ........................................................................................................................... 4–9 gpm / 15–34 lpm
System Type .................................................................................................Open and Closed Center, HTMA Type II
Porting ...................................................................................................................................................-8 SAE O-ring
Output Torque ................................................................................................................................500 ft lbs / 675 Nm
Connect Size and Type ....................................................................................................... 3/8 inch NPT Pipe Fitting
SOUND AND VIBRATION DECLARATION
Test conducted on ID07 operated at standard 5 gpm input
Measured A-weighted sound power level, Lwa (ref. 1pW) in decibels 104.6 dBA
Uncertainty, Kwa, in decibels 3 dBA
Measured A-weighted sound pressure level, Lpa (ref. 20 µPa) at operator’s position, in decibels 96.5 dBA
Uncertainly, Kpa, in decibels 3 dBA
Values determined according to noise test code given in ISO 15744, using the basic standard ISO
3744
NOTE: The sum of a measured noise emission value and its associated uncertainty represents an
upper boundary of the range of values which is likely to occur in measurements.
Declared vibration emission value: A 8.5 m/sec
2
Uncertainty: K 1.3 m/sec
2
Values determined according to ISO 8662-7, ISO 5349-1, 2
SPECIFICATIONS
