152
PURPOSE
CODE
(decimal ASCII)
(hex.ASCII)
REMARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
Advances paper to the next ver-
tical tab position.
(VT)
11
OB
This command causes the paper to be ad-
vanced to the next vertical tab position,
or the top of the next page, whichever is
first. If the vertical tab positions are not
set, this command works as a line feed
command.
Chapter 5
Sets vertical tab positions.
(ESC) “B” nl n2 n3 ...
0
27 66 nl n2 n3 ...
0
IB 42 nl n2 n3 ... 00
This command cancels all current ver-
tical tab positions and sets those defined
at lines nl, n2, n3, etc. The maximum
number of vertical tab positions allowed
is 16. The ASCII Ocharacter is used as a
command terminator. Each vertical tab
position must be specified in ascending
order.
Chapter 5
Selects vertical channels.
(ESC) “l” nO
27
47
nO
IB 2F
no
This command selects one of the multi-
ple vertical channels determined by the
value of nO. The value of nOmust be be-
tween Oand 7.
Chapter 5
