Set line spacing to n/180 inch or n/216 inch
I
Both ] <ESC> “3”
n 27 51 n IB 33 n
Setsthe distance thepaper advances in subsequentlinefeedstorz/180inchorn/216
inch,where n isbetween Oand255. Ifn =O,inStandard modethe line-feed distance
is set to O,but in IBM mode this command is ignored.
Set line spacing to n/60 inch or n/72 inch
I
I Both ] <ESC> “A” n
I 27 65 n I IB 41 n I
In Standard mode, sets the distance the paper advances in subsequent line feeds to
n/60 inch, where n is between Oand 255. If n =O,the line spacing is set to O.
In IBM mode thiscommand defines the distancethe paper advances in subsequent
linefeeds to n/72 inch, where n is between 1and 85.The new line spacing does not
take effect until next <ESC> “2” command.
Execute <ESC> “A”
IBM <ESC> “2” 27 50 IB 32
Sets the line spacing to the value defined by the last preceding <ESC> “A”
command. Sets the line spacing to 1/6 inch if there is no preceding <ESC> “A”
command.
Line feed
I
Both <LF>
10
OA
Prints the current line and feeds the paper to the next line. See the preceding
commands for the line spacing.
Perform one n/180-inch or n/216-inch line feed
]
I
n
27 74 n
IB 4A n
Feeds the paper once by n/180 inches or n/216 inches, where n is between 1 and
255. Does not move the print position right or left in the standard mode. Does not
change the line-spacing setting.
50
