wolfappliance.com
|
35
WOLF WARMING DRAWERS
RANGES / RANGETOPSOVENS / WARMING DRAWERS OUTDOOR GRILLS VENTILATIONCOOKTOPS
Planning Information
The warming drawer must be installed with a Wolf drawer
front, avail able through an authorized Wolf dealer. For local
dealer information, visit the nd a showroom section of our
website, wolfappliance.com. Specic installation instruc-
tions are included with the drawer front.
The warming drawer platform must be able to support 200
lbs
(91 kg). The platform must be a minimum of 1" (25) above
the toe kick to allow for the
5
/8" (16) trim overlap.
For a standard installation, the drawer collar and front panel
sit proud of the cabinet face frame. A recessed installation
requires the cabinetry be recessed by
3
/16" (5) so the collar
is ush with the cabinet face frame but the drawer front
will sit proud. A ush inset installation (excludes L series)
requires the drawer collar and front panel be recessed to be
ush with surrounding cabinetry. Refer to illustrations on the
following pages for minimum cabinet dimensions for your
specic installation.
ELECTRICAL
ELECTRICAL REQUIREMENTS
Electrical Supply grounded, 120 VAC, 60 Hz
Service 15 or 20 amp dedicated circuit
Receptacle 3-prong grounding-type
Power Cord 3'
(.9 m)
