User Guide 41
2-Sided Printing
Printing two-sided jobs
1. You can either:
■ Place the paper in the standard paper/transparency tray (with
the tray switch set to Paper), legal tray, or a high-capacity
paper tray, depending on its size. If you are printing on
letterhead, refer to page 39.
■ Choose to manually feed the paper. Don’t place the paper in
the manual-feed slot until you are prompted by the printer’s
front panel to do so.
2. In the printer driver:
■ Select the tray containing the paper or Manual Feed-Paper.
■ Select two-sided printing. Refer to the table on page 42 for
the wording used in the printer drivers.
3. Send the job to the printer.
4. If you selected Manual Feed-Paper, wait until the printer’s front
panel prompts you, then insert the first sheet of paper in the
manual-feed slot. Wait until you are prompted again before
adding the next sheet.
Note
When the printer prints a two-sided job, the paper partially
exits then is fed back in to print on the second side. To avoid
paper jams, do not touch the paper before it completely exits
the printer.
