Chapter 6: Using the TV’s features
32
3
Press T to highlight History List, and then press W
or X to select the setting you prefer: either On, or
Off.
Note: History List will be cleared every time
the TV is powered off.
4
Press T to highlight ANT/CABLE List, and then
press W or X to select On or Off.
5
Press T to highlight Inputs List, and then press
W or X to select On or Off.
6
Press T to highlight Favorites List, then press W
or X to select On or Off.
7
Press T to highlight REGZA-LINK List, and then
press W or X to select On or Off.
Note: REGZA-LINK List will be automatically
grayed out and set to Off when Enable
REGZA-LINK is switched to Off. (See “To
set the REGZA-LINK
®
Setup” on page 51 for
more information.)
8
To save your entries, highlight Done and press
. To return to factory defaults, highlight Reset
and press
.
To open the Channel Browser
™
:
•
Press W or X on the remote control.
•
Press W to surf backward through the previously
tuned channels in the History list, the channels
in the ANT/ CABLE channel list, the inputs in
the Inputs list, the favorite channels/inputs in the
Favorites list, or the REGZA-LINK
®
devices in the
REGZA-LINK
®
list.
•
Press X to surf forward through the channel
History, the ANT/CABLE channel list, the Inputs
list, the favorite channels/inputs in the Favorites
list, or the REGZA-LINK
®
list.
Elements of the Channel Browser
™
1
Current list (History, ANT/CABLE, Inputs,
Favorites, or REGZA-LINK)
2
Input type
3
Channel or input currently being viewed
4
Channel or input that is currently
highlighted in the browser
5
Channels stored in the History List
To toggle among the available lists:
After opening the Channel Browser
™
, press S or
T to toggle among History, ANT/CABLE, Inputs,
Favorites, and REGZA-LINK.
Note:
•
The Channel Browser
™
opens in History
List by default. Once another list has been
selected, the Channel Browser
™
will open in the
last selected list.
•
If all lists are turned off, pressing
W, X, or
will not display the Channel Browser
™
. If
Favorites List is turned off,
will have no
effect.
•
Pressing
will bring up the Channel Browser
™
Favorites list regardless of the last selected list in
the Channel Browser
™
.
To tune to a channel or input in Browse
mode:
1
While watching TV, press W or X to open
the Channel Browser
™
and surf back to a previous
item or surf forward to the next item in the list.
In Browse mode, when you stop on an item in
the Channel Browser
™
, it will be highlighted and
the TV will automatically tune to the channel or
input.
2
Press to close the Channel Browser
™
.
(continued)
