C. Colour System
A
: Automatic,
P
: PAL ,
S
: SECAM,
N4
:NTSC4.43(MHz),
N3
:NTSC3.58(MHz)
If the colour of a certain channel is abnormal, the
automatic colour system selection (A) may have
malfunctioned or the sound system selection is
wrong. In this case, select another colour and/or
sound system.
D. Position skip selection
Press
s
or
r
to turn the position skip option
on “
8
” or off “
(
”.The position will then be
skipped when you select channels with
P
U
or
P
u
.
The “
8
” mark will appear beside the position
number in the banner when you use the
Number
buttons on the remote control to tune directly.
E.Channelsearchoperation
Press
r
to search up the band or
s
to search down
the band.
Press
s
or
r
repeatedly until your desired channel
is displayed.
When a station/satellite is found, it will be displayed.
NEVER PRESS ANY OTHER BUTTONS
WHILE THE SET IS TUNING.
F.ManualFineTuning
Press
s
or
r
until better picture and sound are
obtained.
G.Label
Station labels appear beside the position display
each time you turn on the TV, select a channel, or
press
k
.
Tochangeorcreatestationlabels:
1) Press
s
or
r
repeatedly to select a character for
therstspace,thenpress
w
.
2) Repeat step 1) to enter the rest of the characters.
If you would like a blank space in the label
name, you must choose a blank space from the
list of characters.
Press
Q
to store your settings.
Sorting positions
- analogue only -
ATV channels may be moved and stored to the position of
your choice.
1
From the
SETUP
menu, press
s
or
r
to select
ATV
Manual Tuning
.
2
With the list of channels now showing, press
s
or
r
to select the channel you want to move and press
w
.
3
Use
s
or
r
to move through the list to your preferred
position. As you do so, the other channels will move
to make room.
4
Press
v
to store your move.
Repeat as necessary, and then press
P
.
DTV Manual Tuning
- digital only -
This feature is available for service engineers or can be used
for direct channel entry if the multiplex channel is known.
1
From the
SETUP
menu, press
s
or
r
to select
DTV
Manual Tuning
, and then press
Q
.
2
Enter the multiplex number using the number buttons
or use
v
or
w
to adjust the number up or down. Then
press
s
to select
Start Scan
, and press
Q
. The TV
will start to search for that multiplex.
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information will be updated.
3
Repeat as necessary. Press
P
tonish.
Getting started
