Setting System Parameters
Verified Account Codes
36 Strata DK System Administrator Guide 5/00
Verified Account Codes
Adding, deleting, or changing Verified Account Codes can be done at designated
stations only. The privileged stations are assigned by the system programmer.
➤ To add or change verified account codes
1. Press [DN] + . You hear a confirmation tone.
2. Enter the desired
three-digit verified
account code
reference number
(
~) or
(
~) for some
systems.
Account codes appear on the
LCD as you enter them. All
systems have 300 account
code numbers (
~),
except the RCTUE/F
processor, which has 500
(
~).
3. Enter the verified
account code. The
system is
programmed for
___digits.
Account codes can be 4~15
digits long; the number of
digits is set system wide for
all account codes in system
programming. The code
appears on the LCD as you
enter it.
4. Press
5HGLDO. You hear a confirmation tone.
The code is stored.
5. Press
6SNU.
6. Repeat Steps 1~4 to
enter more verified
account codes.
The telephone returns to the idle mode.
NO.NNN
VERIFY ACC SET
NO.NNN
ERIFY ACC SET XXX
NO.NNN
XXX XXXXXXXXXXXXX
NO.NNN
DATA PROGRAMMED
