Page 13
Using the Zoom Function
You can change the reproduction ratio in increments of 1%.
NOTE: You can select a preset ratio close to the ratio using
Reduce or Enlarge, and then adjust it further, using
+ or - .
1. Press Reduce / Enlarge.
2. Enter the ratio.
y To Select the Ratio Using
+ and - .
1. Select a preset ratio close to the ratio using Reduce or Enlarge.
2. Adjust the ratio further, using
+ or - .
NOTES:
y Pressing
+ or - changes the ratio in increments of 1%. Pressing and holding down + or -
changes it in increments of 10%.
y If you have incorrectly entered the ratio, readjust it using
+ or - .
y To Enter the Ratio Using the Number Keys:
1. Press Mag. Ratio.
2. Enter the ratio using the number keys.
3. Press
# (enter).
4. Press OK.
3. Note Place the originals, and then press the Start key.
