![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/3c/23cc0d3e-b560-4551-89ed-f4a7e9674ff4/23cc0d3e-b560-4551-89ed-f4a7e9674ff4-bgf3.png)
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler!
Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
Rev B
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-7
MASK – LCD
Tools and Equipment
For your safety and the safety of the people around you, it is important that you use
Electrostatic Discharge (ESD) equipment. Correctly utilizing of the equipment increases the
percentage of successful repairs and saves on the cost of damaged or destroyed parts. The
following equipment is required for disassembly and assembly.
• One Philips screwdriver with type 0 bit (for THIN HEAD screws)
• One Philips screwdriver with type 1 bit (for screws other than above)
• Tweezers (for lifting screws)
• ESD mats (lay on work table or floor)
• An ESD wrist strap and heel grounder
• Anti-static carpet or flooring
• A pair of needle-nose pliers
• Air-ionizers in highly static sensitive areas
• Antenna coaxial cable disconnector
Mark Mark Mark Gap standard Gap standard Gap standard
LCD COVER
LCD TOP COVER LCD COVER
LCD TOP COVER
J1 J2
C3
MASK –
B
BASE –
MASK –
B
K
BASE
FRONT COVER
Around
02
N
BASE – HDD COVER (Around)
H
BASE
BATTERY
BATTERY –
G
K2
BASE – MEMORY COVER (Around)
-
LCD COVE
- MASK