A SERVICE OF

logo

53
Using the dynadock™ and Adjusting Settings
Adjusting audio settings
(Sample Image) The USB Multi-Channel Audio Device Utility
3 In the Analog Output section of the dialog box, select one of
the following:
Headphone or [ ], if you connected headphones in
step 1.
2 Speakers, if you connected speakers in step 1.
4 In the DSP Mode section of the dialog box, click the
7.1 Virtual Speaker Shifter button.
(Sample Image) The 7.1 Virtual Speaker Shifter button
5 Click the Advanced Settings button next to DSP Mode.
(Sample Image) The Advanced Settings button