A SERVICE OF

logo

286
9.BLINKING GRAPHIC SYMBOLS
5.Jam Symbols (Cont.)
9
10
Close the cover of the Bridge Unit.
Releasing a paper misfeed in the Finisher and the Hole Punch Unit
(optional: MJ-1024/1023, MJ-6004)
9
Close the cover of the Hole Punch Unit.
11
Close the upper tray.
Place both hands at the shaded area of the upper tray, and then
push and close the upper tray until it locks.
1
Hold up the guide and remove any mis-
fed paper in the paper exit area.
When the Hole Punch Unit (optional: MJ-6004) is installed, pro-
ceed to step 2. If not installed, proceed to step 6.