36
Using the menus (continued)
Image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked,
it indicates that you cannot select for the current input.)
Item
Description
Computer (D-SUB)
Video USB
RGB Y/P
B
/P
R
Volume
Decrease or increase the Volume
with .
Yes Yes Yes Yes
Keystone
Correct the keystone (trapezoid) distortion of
the screen.
Screen shrinking
Screen shrinking
downward upward
Yes
Yes Yes Yes
Brightness
Adjust the brightness of the image.
Darker
Brighter
Yes Yes Yes Yes
Contrast
Adjust the image contrast.
Lower
Higher
Yes Yes Yes Yes
H-position
Adjust the horizontal position of the image.
Move left
Move right
Yes
No No No
V-position
Adjust the vertical position of the image
.
Move down
Move up
Yes
No No No
Phase
Adjust with to eliminate flicker.
Yes
No No No
Frequency
Adjust with to eliminate periodic
patterns and flickering when many vertical
lines appear on the screen.
Yes
No No No
Color
Adjust with to select the color.
Lighter Deeper
No Yes Yes No
Tint
Adjust the image to an appropriate tint.
Reddish Greenish
No Yes Yes No
Sharpness
Adjust the sharpness of the image.
Softer Sharper
No Yes Yes No
*1: [Tint] can be displayed and adjusted only when the video signal is [NTSC] or [NTSC4.43].
