A SERVICE OF

logo

3. Peel off one insulator from the FL inverter and take out the other one under the
LCD unit.
4. Remove the following screw securing the FL inverter.
M2×4B S-FLAT HEAD screw ×1
5. Disconnect two cables from the FL inverter and remove the FL inverter from the
slot.
Insulator
M2×4B S-FLAT HEAD
FL inverter
Insulator
Cable
Cable
Figure 4-42 Removing the FL inverter
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 4-59