Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
43
123
456
789
ENT
100
0
CH
VOL
POWER
TIMER
RECALL
TV/VIDEO
MUTE
TV
CABLE
VCR
CH RTN
P
IC
S
IZ
E
EXIT
LIGHT
STOP SOURCE
ADV/
PIP CH
ADV/
PIP CH
FAV
FAV
PLAY PIP
REC TV/VCR REW FF
STILL LOCATE SWAP
F
A
V
O
R
IT
E
MENU/
STROBE
ENTER
Using the SRS 3D surround sound feature
The SRS 3D surround sound feature expands the audio listening field
wider and deeper to create exceptional sound quality from the TV’s
speakers. The feature uses stereo signals from a TV broadcast or video
input.
To turn on the SRS 3D surround sound:
1. Select STEREO mode (see “Selecting stereo/SAP broadcasts” on
page 42).
2. Press MENU, and then press x or • until the THEATER menu
appears.
3. Press y or z to highlight SRS 3D.
4. Press x or • to highlight ON.
THEATER
SRS 3D
I MAGE SHAPE
HD1 NORMAL
NORMAL HD2
ON OFF/
To turn off the SRS 3D surround sound:
Highlight OFF in step 4 above.
In general, you can leave the SRS 3D surround mode on because
the TV will automatically produce the type of sound being
broadcast (surround stereo or monaural).
Adjusting the sound quality
You can change the quality of your TV’s sound by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight the item you want to adjust.
AUD OI
MTS
BASS
STEREO
50
50
0
TREBLE
BALANCE
RESET
3. Press x or • to adjust the level.
• x makes the sound quality weaker or decreases the balance in the
right channel, depending on the item selected.
• • makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
Note:
If the broadcast is monaural, the SRS 3D
effect does not work.
yzx •
MENU
______________
SRS and the symbol are trademarks of SRS Labs, Inc.
SRS technology is incorporated under license from SRS Labs, Inc.
