Installing Software
NetWare
181
1 Move the cursor to “Storage adapters” on the menu shown
above with the arrow keys, and press the <Enter> key.
2 As the following menu appears, delete “ADPT160M” with the
<Del> key.
3 Insert the AMI IDE RAID NetWare Driver created with the
Toshiba Server Setup Tool in the floppy disk drive.
4 Select “Add an unlisted driver <Ins>” by pressing the <Insert>
key twice.
5 Press the <Enter> key to retrieve drivers contained in the
floppy disk. The following drivers are added to the screen.
The following drivers were detected for this
server. Add, change,or delete device drivers as
needed.
Device types Driver names
Platform Support Module: MPS14
HotPlug Support Module: (optional)
Storage adapters ADPT160M,
IDEATA
options
_Continue
_Modify
Add, edit, or delete storage drivers. Each control-
ler/adapter requires a driver.
Driver name Device name Stat
||ADPT160M.HAM|| Adaptec Ultra160 ASPI & SCSI Module||
||IDETA.HAM || Generic ATA/IDE/ATAPI.Adapter ||
Additional Driver Options
_Return to driver summary
_Modify
||MEGAIDE.HAM||NetWare 5.x AMI MegaIDE Driver||
