TL-WN322G 54M Wireless USB Adapter User Guide
Figure 4-4 More setting—WEP
¾ SSID: Enter the SSID of the network. The SSID is a unique name shared among all
points in your wireless network. The SSID must be identical for all points in the network,
and is case-sensitive. Place a check in the any box if you would like the device to
connect to the first available Access Point with the strongest signal.
¾ Network Type: Select a network type from the drop-down list.
¾ Infrastructure or Ad-hoc: If you select infrastructure, the device must be connected to
an Access Point. If you select ad-hoc, you may connect the device to another WLAN
client adapter (such as this one).
¾ Authentication: Select an authentication type from the drop down list. Options
available are: Auto, Open System, Shared Key, WPA, WPA-PSK, WPA2,
WPA2-PSK.
¾ Encryption: Select an encryption type from the drop-down list. Options available are:
Disable, WEP, TKIP, AES.
Note: Refer to the WEP encryption and WPA encryption sections in this chapter to
configure the security settings.
- 15 -
