TL-WR843ND 300Mbps Wireless AP/Client Router User Guide
- 60 -
function disabled and should have a new static IP Address assigned to it because its IP Address
may be changed when using the DHCP function.
Figure 4-39 DMZ
To assign a computer or server to be a DMZ server:
1. Check the Enable radio button.
2. Enter the IP Address of a local host in the DMZ Host IP Address field.
3. Click the Save button.
Note:
After you set the DMZ host, the firewall related to the host will not work.
4.9.4 UPnP
Choose menu “Forwarding → UPnP”, you can view the information about UPnP (Universal Plug
and Play) in the screen as shown in Figure 4-40. The UPnP feature allows the devices, such as
Internet computers, to access the local host resources or devices as needed. UPnP
devices can
be automatically discovered by the UPnP service application on the LAN.
Figure 4-40 UPnP
Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or Disable
button.
Current UPnP Settings List - This table displays the current UPnP information.
