TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide
- 81 -
MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address
into the "WAN MAC Address" field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX. Then click the Save button. It will take effect after rebooting.
Figure A-3 MAC Clone
3. I want to use NetMeeting, what do I need to do?
1) If you start NetMeeting as a sponsor, you don’t need to do anything with the Router.
2) If you start as a response, you need to configure Virtual Server or DMZ Host and make
sure the H323 ALG is enabled.
3) How to configure Virtual Server: Log in to the Router, click the “Forwarding” menu on the
left of your browser, and click "Virtual Servers" submenu. On the "Virtual Servers" page,
click Add New…. Then on the “Add or Modify a Virtual Server Entry” page, enter
“11130” for the “Service Port” blank, and your IP address for the “IP Address” blank,
taking 192.168.0.198 for an example, remember to Enable and Save.
Figure A-4 Virtual Servers
Figure A-5 Add or Modify a Virtual server Entry
