Recommended
Electrical Service
DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive
applications, professional hardwire.
Maximum input
amps / watts
DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load (2.2A
max charger-only/combined input load to support charger and AC output is automatically controllable to 66%-33%-0%
based on AC output loading.
BATTERY
Expandable battery
runtime
Runtime is expandable with any number of user supplied wet or gel type batteries.
DC system voltage 12V
Battery recharge rate Selectable 5/20 amp
LEDS ALARMS & SWITCHES
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode.
SURGE / NOISE SUPPRESSION
AC surge
suppression
840 joules AC surge suppression included.
PHYSICAL
Shipping weight (lbs) 20
Shipping weight (kg) 9.1
Shipping
Dimensions (HWD/in)
12.5 x 11 x 10.75
Shipping
Dimensions
(HWD/cm)
31.8 x 27.9 x 27.3
Unit weight (lbs) 18.6
Unit weight (kg) 8.3
Unit Dimensions
(HWD/in)
7 x 8.75 x 9
Unit Dimensions
(HWD/cm)
17.8 x 22.2 x 22.8
Material of
construction
Polycarbonate
Form factors
supported
Mounting slots enable permanent placement of APSX750 on any horizontal surface (see manual for additional mounting
information)
Cooling method Multi-speed fan
Style Heavy-duty with built-in battery charger
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from
line power to battery
mode
Transfer time from line power to battery mode: 10 milliseconds (typical - compatible with many computers, servers and
networking equipment - verify transfer time compatibility of loads for UPS applications)
Low voltage transfer
to battery power
Low voltage transfer to battery power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage
drops to 144V (user adjustable to 163, 182, 201V - see manual)
High voltage transfer
to battery power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272
SPECIAL FEATURES
Appearance Black color
