5
Registering the Handset
You must register the handset to the base before you can use it.
Only one handset can be registered at a time. (If an accessory
handset has previously been registered to a base, you must reset
the handset before you can register it to a new base.)
1. Select your base model from this list and follow these directions:
MODEL DIRECTIONS:
TRU9465
TRU9485
TRU9085
TRU9466
TRU9488
TRU9496
TRU8888
UIP1868P
UIP1869V
•On the base, press the
MENU
soft key.
•Scroll down to REGISTER HANDSET and press the
OK
soft key.
•On the handset, press and hold
[#] until the display
reads HANDSET REGISTERING and you hear a
beep.
TRU9460
TRU9060
TRU9480
TRU8880
•Disconnect the base AC adapter.
•While holding the [find hs/intercom], reconnect the
AC Adapter.
•On the handset, press and hold
[#] until the display
reads HANDSET REGISTERING and you hear a
beep.
TRU8860
TRU8865
•Disconnect the base AC adapter.
•While holding the [find handset], reconnect the AC
Adapter.
•On the handset, press and hold [#] until the display
reads HANDSET REGISTERING and you hear a
beep.
TRU8866
TRU8885
•Disconnect the base AC adapter.
•While holding the
[flash/find hs], reconnect the AC
Adapter.
•On the handset, press and hold
[#] until the display
reads HANDSET REGISTERING and you hear a
beep.
