Cycle selection chart
Cycle
Pots & Pans
A double wash for
maximum cleaning
of cooked-on or
bakedon foods.
NOTE: The Cycle Control knob
stops while the dishwasher heats
water to 135°F (57°C) in both
washes and the final rinse
(marked+). See page 10.
Heavy Wash
A double wash for
cleaning heavily
soiled loads.
NOTE: The Cycle Control knob
does not move while the dish-
washer heats water to 135°F
(57°C) in the final rinse (marked +).
If the Hi-Temp Wash option is
selected water will also be heated
in the main wash (marked ++). See
page 10.
Normal Wash
A single wash for
normal, everyday
soiled loads. (The
Energy Guide Label is based on
this cycle.)
NOTE: The Cycle Control knob
does not move while the dish-
washer heats water to 135°F
(57°C) in the final rinse (marked +).
If the Hi-Temp Wash option is
selected water will also be heated
in the main wash (marked ++). See
page 10.
rt
.
Iins
.
.
. at+
.
Iat stf
Nash
ml-t
5 are
Unse
.
each
Gnse
l t
ml
.
Cycle
Time
[Minutes)
90-l 20’
76'
66*
‘Cycle time includes heated dry time. Cycle time may vary depending on the temperature of
the water entering the dishwasher.
9
