using
your refrigerator
/
Power Saving Control
Setting the control.. .
.4djusting the shelves...
The Temperature Control IS on a console in-
side the refrigerator In the top right corner It controls
the temperature In both the refrigerator and freezer
To start the refrigerator, set the control to Number 3.
G
z!z
1
First, remove fo& from she
2
%de shelf straight ou+ to stop
”
,/,,
This setting should be about right for nor-
mal household refrigerator usage.
Give the refrigerator time to cool down com-
pletely
before addlng food (This may take several
hours).
The control ~111 be set about right when milk or
juice IS as cold as you llke
Power Saving Control.. .
The Power Saving Control operates electric heat-
ers around door openings These heaters help keep
moisture from forming ori the outslde of the
refrigerator
Use the “OFF” setting
when humidity IS low.
Use ?he “ON” setting if
moisture forms on the
outslde of the refrlg-
erator
Light Switch
Temperature Control
3 LITT Tror,T
4
%de :he rest or the way out
Replacing Shelf:
Shelf kuide
1
Fit notches on back of cover Into back supports
on wall of refrtgerator
2. Lower front Into place
Removing crisper and crisper
cover.. .
LtfI the Front, Then the Back
I out to
d Pull A
stop
,galn
Removing Crispers:
1
Slide crisper straight out to stop
2 Lift the front
3
Slide the rest of the way out
4. Replace in reverse order
Removing Cover:
l
Lift front, then Ilf? back
e Pull up and out
Replacing Cover:
1
Fit notches on back ot cover into back supports
on wall of refrigerator
2 Lower front Into place.
