IMX644 Manager Owner’s Manual
13
4 [EQ] button
This button opens the “INPUT EQ” dialog box, where you can edit the EQ (equalizer) that is provided on each input channel.
Click the [CLOSE] button to close the dialog box.
“INPUT EQ” dialog box
The editable parameters differ between MONO INPUT channels and STEREO INPUT channels.
Level adjustment knob
This adjusts the gain of each band.
Right-click and hold down the mouse button to increase the value; left-click and hold down the
mouse button to decrease the value. Double-click to reset the value to 0 dB.
Parameter indication (G/F/Q)
These indicate the gain (G), center/cutoff frequency (F), and Q. Click the [ ]/[ ] buttons, or
make changes in the dialog box that appears when you click the value.
The parameters available for each channel are listed below.
[EQ ON]/[EQ OFF] buttons
These turn the EQ on/off.
[COPY to] button
This copies the parameters of the currently-edited EQ to the EQ of
another input channel.
The “EQ COPY” dialog box will appear when you click this button.
Use the option buttons to select the input channel to which you want
to copy the EQ settings, and click the [OK] button.
Press (hold) the
left button
Press (hold) the
right button
MONO INPUT channel
STEREO INPUT channel
Parameter Range Default
HIGH (shelving)
G -15dB – +15dB 0dB
F 2kHz – 18kHz 10kHz
MID (peaking)
G -15dB – +15dB 0dB
F 40Hz – 18kHz 2kHz
Q 0.5 – 12.0 0.7
LOW (shelving)
G -15dB – +15dB 0dB
F 40Hz – 2kHz 100Hz
Parameter Range Default
HIGH (shelving)
G -15dB – +15dB 0dB
F 2kHz – 18kHz 10kHz
LOW (shelving)
G -15dB – +15dB 0dB
F 40Hz – 2kHz 100Hz
