A SERVICE OF

logo

Open as PDF
next previous
UTILITY MODE
99
Operation
1 Make sure that the MU50 is properly connected to the device
and that the
HOST SELECT HOST SELECT
HOST SELECT HOST SELECT
HOST SELECT switch is properly set.
When using the MIDI terminals, connect the
MIDI OUT MIDI OUT
MIDI OUT MIDI OUT
MIDI OUT of the
MU50 to the
MIDI INMIDI IN
MIDI INMIDI IN
MIDI IN of the data recorder. (See the illustrations
above.) Also, set the
HOST SELECTHOST SELECT
HOST SELECTHOST SELECT
HOST SELECT switch to
MIDIMIDI
MIDIMIDI
MIDI.
When using the TO HOST terminal, make sure that the HOST
SELECT switch is set corresponding to the device to be used. (Re-
fer to page 25 for more on host computer connections.)
2 Press the
UTIL UTIL
UTIL UTIL
UTIL button and select “DUMPOUT,” then press the
ENTER ENTER
ENTER ENTER
ENTER button.
3 From the Dump Out menu, select the type of data to be sent:
All, Multi or Performance. Then, press the
ENTER ENTER
ENTER ENTER
ENTER button to call
up the selected data dump.