A SERVICE OF

logo

5 - 44
ENG
CLUTCH
EAS00275
REMOVING THE CLUTCH
1. Remove:
clutch cover
1
NOTE:
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
1
2. Straighten the lock washer tab.
3. Loosen:
clutch boss nut
1
NOTE:
_
While holding the clutch boss
2 with the uni-
versal clutch holder 3, loosen the clutch boss
nut.
4. Remove:
clutch boss nut
lock washer
clutch boss
Universal clutch holder
90890-04086
3
2
1
EAS00280
CHECKING THE FRICTION PLATES
The following procedure applies to all of the
friction plates.
1. Check:
friction plate 1
friction plate 2
friction plate 3
Damage/wear Replace the friction plates
as a set.